Introduction
All flat rolled coil steel is initially hot rolled by passing a slab through a multi-stand hot rolling mill to produce a wide variety of thicknesses up to one inch thick. Modern state-of-the-art process control computers set up and monitor all the equipment necessary to roll and coil the steel to the customer's exact specifications.
Hot rolled steel destined for the sheet market can be either shipped as a hot band or cleaned in an acid bath and sold as pickled band. Alloy products are also available.
Capabilities
| Gauge |
Width |
0.047 - 1.000"
(1.19 - 25.4 mm) |
26 - 75.5"
(660 - 1918 mm) |
Size capability may vary by specification and facility. Please inquire for more specific information.
Grades
| Agency spec |
Grade |
| ASTM A1011 / A1018 |
Mild CS and DS, HSLA 45-100 ksi (300-690 MPa), SS 30-55 ksi (200-380 MPa) |
| ASTM A606 |
Type 4 Weathering |
| Conversion |
Conversion to A36, to A414 PVQ, to A871-65 |
| EN 10149 |
S315MC-S700MC |
| SAE J403 |
C1004-1095, 10B38 |
| SAEJ404 |
4130, 4140, 6150 |
| API |
X42 - X80, H40, J55, L80, N80, P110 |
| JIS G3113 |
SAPH 400, SAPH 440 |
| JIS G3134 |
SPFH 540, SPFH 540SF/FB, SPFH 590, SPFH 590Y, DP590T/300Y, SPFH 590SF/FB |
This is a partial listing. Please inquire for other agency specs or OEM specific grades.
Features
We offer a wide range of precisely controlled chemical compositions with low residuals. Various product attributes, additional offerings and capabilities are shown below.
Surface treatments
-
Black
Black bands have a protective scale jacket that forms after rolling and protects the steel during short term storage.
-
Pickled and oiled
Pickling the steel in an acid bath removes the scale jacket and leaves a clean surface for further processing. The surface is treated with oil to prevent corrosion during shipping and storage.
-
Dry lube
A dry film lubricant can be applied to the pickled surface for improved formability.
-
Floor plate / A786 / Diamond plate
A pattern is embossed on the top of the sheet to increase traction.
-
Enhanced surface
Inquire about enhanced surfaces available for laser cutting.
